Section 7
ILLUSTRATIONS AND PARTS LIST
29
7.3 FLUID MAMAGEMENT SYSTEM
key part
number description number quantity
1 plug, hex head 1 1/16"-12 SAE 250039-359 1
2 o-ring (I) 250025-419 3
3 housing, bell 250025-309 1
4 o-ring, 1 7/16" x 1/16" 826502-127 1
5 element, separator air/fluid (II) 250025-264 1
6 o-ring, 2 3/16" x 3/32" 826502-139 1
7 cap, separator element 250026-038 1
8 element, fluid filter (III) 250026-982 1
9 adapter, fluid filter 250025-914 1
10 glass, sight 250025-420 1
11 plug, thermostat 1 1/16"-12 250025-418 1
12 guide, thermostat spring 250025-417 1
13 pin, roll 1/4" x 1 1/2" 827404-150 1
14 spring, compression 250025-464 1
15 piston, thermostat 250025-415 1
16 actuator, thermostat (IV) 250025-413 1
17 capscrew, ferry hd 1/2"-13 x 3" 828408-300 12
•capscrew, socket ISO4762 m 12 x 80 (metric) 829312-080 12
18 decal, fluid Sullube (V) 02250069-389 1
(I) For replacement only.
(II) For maintenance on air/fluid separator element no. 250025-264, order repair kit no. 250028-033.
(III) For maintenance on fluid filter element no. 250026-982, order repair kit no. 250028-032.
(IV) For maintenance on thermostat actuator no. 250025-413, order repair kit no. 250028-036.
(V) Decal will vary with compressor fluid fill requirement. Factory fill (Sullube) decal part no. is 02250069-
389.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
