Section 10
ILLUSTRATIONS AND PARTS LIST
43
10.4 MOTOR, COUPLING, FAN AND PARTS
key part
number description number quantity
1 support, motor
(15, 20, 25 HP/11, 15, 18.5 KW) 02250046-622 1
Ssupport, motor (30 HP/22 KW) 02250046-624 1
2 capscrew, M12 x 30MM 829312-030 4
3 housing, adaptor motor
(15, 20, 25 HP/11, 15, 18.5 KW) 02250045-831 1
Shousing, adaptor motor (30 HP/22 KW) 02250045-833 1
4 capscrew, hex GR8 1/2”-13 x 1 1/4” 829408-125 4
5 guard, fan 02250055-600 1
6 coupling, 1 5/8” (I) 250042-728 1
7 venturi, fan inlet (15, 20 HP/11, 15 KW) 02250050-241 1
Sventuri, fan inlet (25, 30 HP/18.5, 22 KW) 02250046-603 1
8 fan, backward inclined wheel
(15, 25, 30 HP/11, 15, 18.5 KW) (I) 02250050-539 1
Sfan, backward inclined wheel
(20 HP/15 KW) (I) 02250050-240 1
9 housing, fan 02250045-829 1
10 key, 10 x 8 x 40 865210-040 1
11 motor consult factory 1
12 screw, socket M12 x 40MM 829312-040 6
13 washer, 12MM 865712-370 2
14 nut, M12 x 1.75 825912-175 2
15 washer, 8MM 865408-170 1
16 capscrew, 8MM x 16MM 828008-016 1
17 washer, 12MM 865712-370 1
18 nut, hex M12 x 1.75 825912-175 1
19 isolator, vibration 75MM x 50MM 02250047-047 1
20 elbow, 45 liq-tite 1 1/4” (not shown) 846500-125 1
21 washer, conduit red. 1 1/2”-1” (not shown) 847006-040 2
22 spacer, shaft
(15, 20, 25 HP/11, 15, 18.5 KW) 02250049-354 1
Sspacer, shaft (30 HP/22 KW) 02250049-159 1
23 angle, support cooler 02250046-915 1
24 insert, 6MM 02250047-083 1
(I) Pre-heating required before assembly. For maintenance, order element no. 02250048-344.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
