Section 11
ILLUSTRATIONS AND PARTS LIST
49
11.3 INLET CONTROL, SEAL/DRIVE GEAR AND PARTS (ES--8) (CONTINUED)
key part
number description number quantity
33 spring, inlet check 250042---088 1
34 stem, inlet valve 250035---584 1
35 element, thermal valve 045764 1
36 isolator, vibration 02250047---047 2
37 valve, shuttle 1/4” 408893 1
38 nipple, pipe 1/4” x close 823204---000 2
39 sleeve, wear (II) 02250048---317 1
40 screw, sltd ft point 250042---203 1
41 screw, socket M12 x 30MM 829312---030 8
(II) For ma intenance on ES---8 shaft sea l, order tool kit part numbers 02250061---961 and 001932---005.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR/DRYER.
To Next Page
Loading...
