Section 8
ILLUSTRATIONS AND PARTS LIST
61
8.7 DISCHARGE SYSTEM (CONTINUED)
key part
number description number quantity
31 plug, sight glass 1---5/16”SAE 02250097---610 1
32 valve, ball 3/8”m x 3/8”f nptf 02250100---094 1
33 elbow, 90_ 3/4”SAE x 3/8”f nptf 02250100---093 1
34 capscrew, hex gr5 1/2”---13 x 1---1/4” plated 829108---125 4
35 washer, springlock reg plated 1/2” 837808---125 4
36 plug, str aight thread 3/4”---16 SAE viton 250042---623 1
37 gauge, temperature---sump 100_--- 2 5 0 _ 02250100---096 1
38 switch, temperature 240_ 3/4” SAE 02250100---095 1
39 coupling, conduit 1/2” 250007---179 1
40 elbow, 90_ conduit 1/2” 846600---050 1
41 conduit, csa flex 1/2” 846315---050 2.5 ft.
42 plug, o---ring 1---1/4” 040029 1
43 joint, expansion ls10 unit/tank 02250097---823 1
44 support, tank brace ls10 02250107---906 1
45 capscrew, hex gr5 3/8”---16 x 1” 829106---100 2
46 washer, springlock reg plated 3/8” 837806---094 2
47 nut, hex plated 3/8”---16 825206---337 2
48 adapter, pipe---f 1/2”SAE x 1/4”npt 811504---025 1
49 bushing, reducing 1/4” x 1/8” plated 867100---005 1
50 fitting, compression adjust able 250028---635‘ 1
51 probe, rtd 100 ohm platinum 250039---909 1
52 locknut, conduit 1/2” 847200---050 1
53 plug, pipe 3/8” 3000# steel 807800---015 1
54 orifice, 1/8 m x 1/8 f x .062 224427 1
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
