Section 8
ILLUSTRATIONS AND PARTS LIST
57
8.5 AIR INLET SYSTEM
key part
number description number quantity
1 filter, air inlet heavy duty (25, 30HP)
(I)
02250107--327 1
wfilter, air inlet heavy duty (40HP)
(II)
040595 1
2 indicator, maintenance 045757 1
3 band, mounting--inlet filter (25, 30HP) 043370 1
S
band, mounting--inlet filter (40HP) 040598 1
4 clamp, inlet elbow 250018--550 1
5 screw, ser washer 5/16”--18 x 3/4” 829705--075 2
6 connector, 1/4”tube x 1/8”npt 250018--427 1
7 tubing, nylon 1/4” black 02250054--861 --
8 support, filter heavy duty 02250100--529 1
9 nut, hex flanged plated 5/16”--18 825305--283 2
10 elbow, rubber 90
_
red 2--1/2” x 3” (25, 30HP) 250032--462 1
S
elbow, rubber 90
_
3” (40HP) 040599 1
11 capscrew, hex gr5 5/8”--11 x 1--1/2” 829110--150 4
12 washer, springlock reg plated 5/8” 837810--156 4
13 valve, inlet control
(III)
02250088--348 1
14 elbow, 1/4”tube x 1/4”npt 250018--430 1
15 o--ring, viton 826502--238 1
16 support, filter heavy duty 02250100--528 1
17 capscrew, hex gr5 5/16”--18 x 1--3/4” 829105--175 1
18 nut, hex flanged plated 5/16”--18 825305--283 1
19 lug, scrulug--ground 849215--025 1
20 capscrew, hex gr5 3/8”--16 x 1--3/4” 829106--175 1
21 washer, springlock reg plated 3/8” 837806--094 1
22 nut, hex plated 3/8”--16 825206--337 1
23 capscrew, hex gr5 3/8”--16 x 1--1/2” 829106--150 2
24 washer, springlock reg plated 3/8” 837806--094 2
25 nut, hex plated 3/8”--16 825206--337 2
26 clamp, inlet elbow (25, 30HP) 040083 1
S
clamp, inlet elbow (40HP) 250018--550 1
(I)
For maintenance on air filter no. 02250107--327, order replacement element no. 043334.
(II)
For maintenance on air filter no. 040595, order replacement element no. 040596.
(III)
For maintenance on air inlet valve no. 02250088--348, order repair kit no. 250019--451, and/or repair kit for
springs no. 250029--315.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
