SECTION 3 SHOPTEK
™
USER MANUAL
39
02250180-090 R00
Identification - ST400, ST500, ST700, 5-10HP Tank Mount
SEE TABLE NOTES:
1. ALLOW 4.00 FEET [1.25 METERS] MINIMUM CLEARANCE AROUND
MACHINE FOR ACCESS AND FREE CIRCULATION OF AIR.
2. A FOUNDATION OR MOUNTING CAPABLE OF SUPPORTING THE
WEIGHT OF PACKAGE, AND RIGID ENOUGH TO MAINTAIN THE
COMPRESSSOR FRAME LEVEL IS REQUIRED.
3. ALL DIMENSIONS ARE +/- .50” [12.7MM]
4. RECOMMENDED INCOMING CUSTOMER POWER SUPPLY IS
SHOWN ON DRAWING.
5. DOORS ARE REMOVABLE USING LIFT-OFF PINS.
6. ALL DIMENSIONS SHOWN IN INCHES WITH MILLIMETER DIMEN-
SIONS IN BRACKETS.
A1: EXHAUST AIR OUT
A2: AIR INLET
A3: INCOMING CUSTOMER POWER SUPPLY 1.96[50]DIA
A4: AIR OUT CONNECTION 1 1/4”NPT
A5: SERIAL PLATE
A6: HAND HOLD
A7: CONTAINMENT PAN DRAIN 1/4”NPT
A8: E-STOP
A9: CONTROLLER
A10: TANK MOUNT SERIAL PLATE
A11: TANK DRAIN 1/4”NPT
MACHINE WEIGHTS
ST400 854LBS[388KG]
ST500 876LBS[398KG]
ST700 897LBS[408KG]
To Next Page
Loading...
