Section 8
ILLUSTRATIONS AND PARTS LIST
95
8.17 COMPRESSOR DISCHARGE SYSTEM -- 200 -- 300HP/150 -- 225KW (WATER-- COOLED)
(continued)
key part
number description number quantity
61 nut, hex 1/2” 824208---385 4
62 washer, springlock 1/2” 837508---125 4
63 nipple, pipe 1 1/2” x close 822224---000 1
64 capscrew, hex 1/2” x 1 3/4” 828608---175 6
65 washer, regular 1/2” 837208---112 6
66 capscrew, hex 1/2” x 1 1/4” 828608---125 4
67 connector, tube---m 1 1/ 2” x 1 1/2” 810224---150 2
68 brace, aftercooler 250009---509 1
69 capscrew, hex 1/2” x 1 1/2” 828608---150 6
70 separator, 4” combination trap (VIII) 250000---511 1
71 nipple, pipe 3” x 22”
(200 --- 250HP/150 --- 187KW) 822148---220 1
Snipple, pipe 4” x 21” (300HP/225KW) 822164---210 1
72 flange, threaded reducing 3” x 9”
(200 --- 250HP/150 --- 187KW) 819548---090 1
Sflange, threaded 4” 150# (300HP/225KW) 819315---064 1
73 u---bolt, 1/2” x 4” pipe 829008---400 1
74 flange, threaded 4” 125# 818312---064 1
75 bushing, reducing hex 3” x 1 1/ 2” 802112---060 2
76 u---bolt, 1/2” x 8” pipe 829008---800 1
77 capscrew, hex 3/8” x 1 1/4” 828606---125 2
78 washer, springlock 1/4” 837504---062 2
79 nut, hex 1/4” 824204---226 2
80 valve, discharge check 067339---001 1
81 nipple, half pipe 3” x 11 1/2” 822848---115 1
82 gasket, flange 6” 150# 241621---12 1
83 gasket, flange 4” 125# 242437---010 3
84 tee, reducing 3/4” x 3/4” x 1” 802203---034 1
85 plug, pipe 3/4” 807800---030 1
86 nipple, pipe 1 1/2” x close 822224---000 1
(VIII) For maintenance on combination trap no. 250000---511, order repair kit no. 250033---036.
PLEASE NOTE: WHEN ORDERING PARTS, INDICA TE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
