Section 3
SPECIFICATIONS
9
MOTOR (50 Cycle Compressors)
ST ANDARD MODELS
Size 200---400HP/150 --- 300KW --- 380V
500---600HP/375 --- 450KW --- 3300V
Type Open Dripproof, Three Phase, 50 Cycles
104_F(40_C) Maximum Ambient Temperature
Options Available: Other Voltages
T.E.F.C. also Available
Speed 1500 RPM
LUBRICATION GUIDE---STANDARD COMPRES-
SORS
Sullair TS---32 Series standard compressors are
filled with Sullube 32 fluid as factory fill. MIXING OF
OTHER FLUIDS WITHIN THE COMPRESSOR
SHOULD BE AUTHORIZED BY THE F ACTORY
OTHERWISE THIS WILL VOID ALL WARRAN-
TIES.
Sullube 32 fluid should be c hanged every 8000
hours or once a year, whichever comes first. The
fluid should be changed more frequently under se-
vere operating conditions, such as high ambient
temperatures coupled with high humidity, or when
high particulate level, corrosive gases or strong oxi-
dizing gases are present in the air.
Maintenance of all other components is still recom-
mended as indicated in the Maintenance section of
this manual.
APPLICATION GUIDE
Sullair encourages the user to participate in a fluid
analysis program with the fluid suppliers. This
could result in a fluid change interval differing from
that stated in the manual. Contact your Sullair
dealer for details.
To Next Page
Loading...
