Section 8
ILLUSTRATIONS AND PARTS LIST
69
8.6 FLUID COOLING SYSTEM- AIR-COOLED 400HP/ 298KW
key part
number description number quantity
1 strip, weather 1” x 1/8” foam 02250058-345 1
2 panel, adapter 400hp clr pk 02250121-117 2
3 panel, adapter 400hp clr pk w/clean 02250121-118 2
4 saddle, motor supt 300/400hp clr pk 02250121-119 1
5 support, mtr 300/400hp clr pk 02250121-120 1
6 plate, clean out cover (I) 02250121-123 4
7 panel, venturi 48” TS32-300-450 02250121-343 1
8 cooler, air after 400-450 hp 02250122-215 1
9 cooler, oil 400-450 hp side x side 02250122-217 1
10 bar, back-up horizontal clr pk 02250123-797 3
11 support, cooler TS32A-300/350 intac mtrside 02250123-834 2
12 support, cooler TS32A-300/350 intac strside 02250123-835 2
13 hinge, door 02250125-402 4
14 lug, lifting clr pk - 90deg bend 02250132-040 4
15 grommet, rubber 040125 16
16 guard, fan (1600q) 241347 2
17 nut, hex pltd 1/2-13 825208-448 12
18 nut, hex f pltd 5/16-18 825305-283 40
19 nut, hex locking 5/16-18 825505-166 8
20 capscr, hex gr5 3/8-16 x 1 1/4 829106-125 28
21 capscr, hex gr5 1/2-13 x 1 1/2 829108-150 8
22 capscr, hex gr5 1/2-13 x 1 3/4 829108-175 4
23 screw, hex ser washer 5/16-18 x 3/4 829705-075 38
24 screw, hex ser washer 5/16-18 x 1 829705-100 12
25 screw, hex ser washer 3/8-16 x 3/4 829706-075 9
26 screw, hex ser washer 3/8-16 x 1 829706-100 16
27 screw, hex ser washer 3/8-16 x 1 1/4 829706-125 1
28 washer, spr lock reg pltd 3/8 837806-094 24
29 washer, spr lock reg pltd 1/2 837808-125 12
(Continued on page 71)
(I) DO NOT operate the compressor without cooler access panels in place.
PLEASE NOTE: WHEN ORDERING PARTS, INDICATE THE SERIAL NUMBER OF COMPRESSOR
To Next Page
Loading...
