Section 7
ILLUSTRATIONS AND PARTS LIST
95
7.16 SULLICON CONTROL SYSTEM
key part
number description number quantity
1 plunger 020094 1
2 stop, control 020864 1
3 washer, back-up 021172 1
4 body,control 021635 1
5 cover, control 021654 1
6 capscrew, socket 1/4-28unf x 1.00” 02250150-864 1
7 pin,yoke 1/4” 040065 1
8 rod-end, yoke 040138 1
9 bolt,adjust sullicon spring 250009-134 1
10 lever,ctl sullicon 250017-207 1
11 diaphragm, sullicon 250020-028 1
12 spring, ctl rsvs sullicon 250024-507 1
13 nut,hex pltd 5/16-18 825205-273 1
14 nut,hex pltd 3/8-16 825206-337 6
15 nut,hex locking 5/16-18 825505-166 1
16 pin,cotter ep-sc 1/16 x 3/4 827101-075 1
17 capscrew,hex gr5 5/16-18 x 1 1/4 829105-125 1
18 capscrew,hex gr5 5/16-18 x 2 1/4 829105-225 1
19 capscrew,hex gr5 3/8-16 x 2 1/2 829106-250 4
20 screw, mach-hex 3/8-16 x 2 830106-200 1
21 screw, shoulder 3/8 x 2 830506-200 1
22 screw, mach-hex 5/16-24 x 3 1/2 831105-350 1
23 washer, spr lock reg pltd 5/16 837805-078 2
24 washer, spr lock reg pltd 3/8 837806-094 6
25 nut, hex jam rh pltd 5/16-24 868205-195 2
NOTE: For maintenace on Sullicon Control, order repair kit no. 250020-353 and replacement spring no.
250024-507.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
To Next Page
Loading...