Section 7
ILLUSTRATIONS AND PARTS LIST
89
7.14 CONTROL SYSTEM - DUAL CONTROL
key part
number description number quantity
1 starter, assy ls16 mfv sz-5 n4 02250100-909 1
2 valve, solenoid 2wno 3/8” 150#vac n4 (I) 02250125-538 1
3 support, bracket vac press sw 02250152-165 1
4 support, anglr vac press sw 02250152-168 1
5 switch, vacuum 0-30”hg n1 - 1/4”npt 02250164-176 1
6 support, starter rh 12 & 16 250017-977 1
7 support, starter lh 250017-978 1
8 switch, pressure n.o. 10 psi 250017-992 2
9 grip, cord for so 12/4 st 3/4” 250018-497 1
10 grip, cord so16/45 str 1/2” 250021-321 2
11 elbow, 90deg m swvl 1/4t x 1/8npt 250025-849 3
12 elbow, 90deg m swvl 1/4t x 1/4 npt 250025-850 2
13 switch, press 12.5psi fixed nc 250025-975 1
14 plug, hole n4 1/2” cond 409918-002 4
15 nut, hex pltd #10-24 825202-130 2
16 nut, hex pltd 3/8-16 825206-337 4
17 nut, hex f pltd 5/16-18 825305-283 4
18 capscrew, hex gr5 5/16-18 x 3/4 829105-075 2
19 capscrew, hex gr5 3/8-16 x 1 829106-100 4
20 capscrew, hex gr5 1/2-13 x 1 1/2 829108-150 4
21 screw, mach-rd hd #10-24 x 1/2 831602-050 2
22 washer, spr lock reg pltd #10 837802-047 2
23 washer, spr lock reg pltd 3/8 837806-094 4
24 washer, spr lock reg pltd 1/2 837808-125 4
25 washer, pl-b reg pltd 5/16 838205-071 2
26 washer, pl-b reg pltd 3/8 838206-071 4
27 washer, pl-b reg pltd 1/2 838208-112 4
28 elbow, 90deg lq-tite 1/2 846600-050 1
29 nipple, chase cond 1/2 847815-050 1
30 bushing, red pltd 3/8 x 1/4 867101-010 1
(I) For maintenance on solenoid valve no. 02250125-538, order repair kit no. 02250160-750, and replace-
ment coil no. 02250125-858.
PLEASE NOTE: WHEN ORDERING PARTS, ALWAYS INDICATE SERIAL NUMBER OF VACUUM
To Next Page
Loading...