EasyManua.ls Logo

Sumiko S.5 - Technical Specifications (Sumiko S.5); Core Components; Performance & Features; Physical & Accessory Details

Sumiko S.5
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SUMIKO S.5 ACTIVE SUBWOOFER
___________
TECHNICAL SPECIFICATIONS
!
SUMIKO S.5 ACTIVE SUBWOOFER
TECHNICAL SPECIFICATIONS
!
!
!
!
Loudspeaker Type Closed box loaded, down-firing woofer
Drive unit 1 x 210mm (8”) very long throw, treated paper cone, wide
rubber surround woofer
Amplifier Type High linearity Class AB
Power amplifier 150W rms, 250W peak
Frequency response (in room)
@-6dB/@-3dB
From 30/40 Hz to Fc
(Fc user adjustable)
Mains input voltage Factory selected, 120Vac - 60Hz or 230 Vac - 50 Hz
Fuse T4.0 A (120Vac, 60Hz); T2.0 A (230V, 50Hz)
System protection - Output signal short circuit
- Over-heating
- DC fault
Controls - Independent Master and LFE volume controls;
- Continuously adjustable Crossover frequency (30 to 120Hz),
slope 24dB/oct;
- Signal phase inversion switch (0/180°)
Additional features Auto switch-on/off (deselectable)
Audio signal inputs - LFE (Low Frequency Effect) signal, phono plug;
- Line level signal, single phono plug;
- High level signals, Neutrik 4-pole Speakon©
Power consumption <= 0.5 W (Stand-by)
Rated power 250W
Finish Gloss White or Grand Piano Black
Dimensions (WxHxD) 285x335x315mm; 11.2x13.2x12.4 in.
Including feet
Supplied accessoires - User manual
- Mains lead
- 10m/32.8 ft Neutrik Speakon© interconnection cable

Related product manuals