11
stroller components:
assembly instructions:
2
IMPORTANT! Before assembly, inspect components for damaged hardware,
loose joints or missing parts. Never use if any parts are missing or broken.
!
stroller seat
2 rear wheels
2 front wheels
front wheels 28710-05
rear wheels 28710-06
cup holder 28710-08
Prodigy
car
seat adaptor 28710-04
bumper bar 28710-07
storage basket 28710-09
canopy 28710-03
stroller parts:
click!
stroller frame with basket
canopy
cup holder
bumper bar
click!
click!
2
only use the prodigy® infant car seat with this stroller
• Infant car seat adapter must be securely locked
to stroller before infant car seat is placed
on stroller.
• NEVER use infant car seat in stroller without
car seat adapter.
• CHECK to confirm that car seat adapter and car
seat carrier are securely locked to the stroller.
• NEVER lift stroller by infant car seat handle.
• Read all warnings on front page of this
instruction booklet and on product.
WARNING:
PREVENT SERIOUS INJURY
OR DEATH FROM FALLS
attaching car seat adapter and infant car seat :
Pull up on the car seat adapter
to make sure it is securely locked.
!
Pull up on the car seat to make
sure it is properly locked into place.
!
click!
click!
1
push on rear wheels, both sides
push on front wheels
press down on brake pedal to
engage brake and remove
stroller seat
click!
align car seat adapter with arrow facing
forward. Push down to lock onto frame
®
prodigy car seat adapter
®
IMPORTANT! Tug on each wheel to
ensure they are securely attached
!
Remove and dispose of
packing material properly
!
2
1
3
install car seat rear facing,
push down to lock into position
To Next Page
Loading...
