Summer 3Dpac cs lite - Adjusting Shoulder Harness Position; Positioning Shoulder Harness

adjusting shoulder harness position:
1st, unclip harness clips. 2nd, remove harness pads. 3rd, slide shoulder harness out of
slot. Adjust harness position as shown below and reinstall harness pads.
1
st
unclip!
3
rd
remove
harness
straps!
remove
harness
straps!
2
nd
middle
position!
middle
position!
upper
position!
upper
position!
lower
position!
lower
position!
remove
harness
pads!
remove
harness
pads!
7