Summer My Bath Seat - User Manual

Other manuals for Summer My Bath Seat

Instruction Manual12 pages

Need help?

Do you have a question about the Summer My Bath Seat and is the answer not in the manual?

Summary

Important Safety Warnings

General Safety Precautions

Crucial safety guidelines including staying within arm's reach, age suitability, and proper suction cup adhesion.

Drowning Prevention

Emphasizes the extreme danger of drowning in shallow water and the need for constant supervision.

Installing the Bath Seat

Installation Warnings and Guidelines

Specific warnings against incorrect tub types and instructions for proper suction cup and arm locking.

Removing the Bath Seat

Step-by-Step Removal Process

Instructions on unlocking suction cups and retracting arms to safely remove the bath seat.

Attaching and Removing Trays and Toys

Care and Maintenance

Cleaning Instructions

Guidelines for surface cleaning the bath seat and toys with mild soap and water.

Storage Recommendations

Advice on storing the bath seat, ensuring suction cups are not creased or folded.

Maintenance Checks

Instructions to inspect the bath seat for damage or missing parts before each use.

The Summer My Bath Seat® with Toys is a bath seat designed to provide support for infants during bath time. It is suitable for babies who can sit up unassisted, typically around 5 months of age, and should be discontinued when the baby begins pulling to a standing position, usually around 10 months of age. Adult assembly and installation are required.

Function Description:

The bath seat is designed to help babies sit securely in a standard rectangular adult bathtub, allowing parents or caregivers to bathe them more easily. It features three suction cups that firmly attach to the interior walls of the tub, providing stability. The seat includes side extending arms and a rear extending arm, each with locking dials to ensure a secure fit. The product also comes with front hanging toys and a suction cup tray toy to engage the baby during bath time. A play tray is also included.

Important Technical Specifications:

Suitability: For babies able to sit up unassisted (approx. 5 months) until they begin pulling to a standing position (approx. 10 months).
Tub Compatibility: ONLY for use in standard rectangular adult tubs with inner width dimensions of 21-24 inches.
Water Temperature: Bath water should be between 90 and 100°F (32.2 and 37.8°C).
Water Level: DO NOT fill the adult tub over the "Max Fill Level" mark located on the seat. Babies can drown in as little as 1 inch (2.5 cm) of water.
Suction Cups: Three suction cups (one rear, two side) with locking dials for secure attachment.
Adjustability: Rear and side extending arms with locking tabs and dials for a customized fit within the tub.

Usage Features:

Installation:
1. Place the bath seat at the rear of a standard adult rectangular tub.
2. Fully extend the Rear Extending Arm until both Locking Tabs "click" open, ensuring the arm is locked.
3. Ensure the Rear Suction Cup is flush against the rear tub wall and firmly press it. Rotate the Locking Dial clockwise to lock the suction cup in place. The rear suction cup swivels to accommodate angled tub walls.
4. Rotate the Locking Dials on the Side Extending Arms evenly until the Side Suction Cups make contact with the interior side walls of the tub.
5. Continue rotating the Locking Dials until the Red Indicators are no longer visible, indicating a secure lock.
6. Before bathing, ENSURE the bath seat and all three suction cups are securely locked to the tub walls.
Removal:
1. Turn all Locking Dials towards the unlock icon.
2. Pull on the Suction Cup tabs to break the seal with the tub wall.
3. Rotate the Locking Dials on the Side Extending Arms until they are no longer in contact with the interior walls of the tub.
4. Rotate the Locking Dial on the rear counter-clockwise to release the Suction Cup from the rear tub wall.
5. Press both Locking Tabs on the Rear Extending Arm inward and push the arm fully back into the bath seat.
Attaching/Removing Toys and Tray:
- The manual illustrates how to attach and remove the front hanging toys and the suction cup tray toy, typically involving pressing or pulling on specific points to secure or release them. The suction cup tray toy is removed by pulling on its tab to break the seal.
Safety Warnings:
- NOT A SAFETY DEVICE. Babies have DROWNED while using bath seats.
- ALWAYS STAY WITHIN ARM'S REACH OF YOUR BABY.
- NEVER leave your child unattended.
- NEVER allow other children to substitute for adult supervision.
- NEVER allow a second child in the tub when the bath seat is in use.
- NEVER use in a sink.
- NEVER use in non-rectangular, oval, Jacuzzi, whirlpool style tubs, or tubs with water jet nozzles.
- Discontinue use if the product becomes damaged, broken, or disassembled.
- NEVER bathe baby until water temperature is tested.
- FALL HAZARD: NEVER lift or carry baby in the bath seat.

Maintenance Features:

Cleaning:
- Surface-clean suction cups and the bath seat after each use with warm water and mild soap.
- Dry with a clean towel.
- Ensure the product is completely dry before any long periods of storage.
- To clean toys, wipe them clean and dry completely before storing.
- For the squirting fish toy, squeeze all water out and dry before storing.
Storage:
- When stored, ensure suction cups are not creased or folded to maintain their effectiveness.
Inspection:
- Before each use, inspect the bath seat for damaged components, missing parts, or sharp edges.
- DO NOT use the product if any parts are missing or broken.