attaching the bumper bar and child’s tray:
7
7
Note: Max weight of
cup-holder 1 lb (.45kg).
!
To attach bumper bar, insert into the
openings on the front of stroller.
MAKE SURE the bumper bar is
securely attached and clicks into
place by pulling on it.
To remove bumper bar, press buttons
on both sides of stroller and pull off
the frame.
8
To attach cupholder, slide down onto
the mount on either side of the stroller
frame as shown.
To remove, lift off of mount.
To remove:
Press tab in
and lift off
bumper bar.
9
To attach child’s tray, insert metal tab
into slot on bumper bar as shown.
10
Note: The cup holder
is interchangeable to
either side.
!
To avoid injury, NEVER lift or carry by the armbar.
WARNING
CAUTION
DO NOT remove the child tray
when child is in the seat.
click!
click!
click!
To Next Page
Loading...
