SummerAire ELECTRIC WARM AIR FURNACE User Manual

1
USER MANUAL
ELECTRIC
WARM AIR FURNACE
Save these instructions for reference
This furnace must be installed by a certied installer
and where required by law, a licenced technician.
FOR SERVICE CALL:
INSTALLATION INFORMATION
_________________ _________________
Installing Contractor Telephone Number
_________________ _________________
Unit Model Number Unit Serial Number
_________________
Date of Installation
MANUFACTURED BY
SUMMERAIRE MANUFACTURING

SummerAire ELECTRIC WARM AIR FURNACE Specifications

General

Voltage	208/240 V
Temperature Rise	30-70°F
Thermostat Control	24 V
Weight	150 lbs
Phase	Single-phase

Summary

Operating Sequence

Heating Operation

Details the sequence of operations for the heating cycle, including thermostat initiation and element activation.

Cooling Operation

Explains the cooling cycle, blower speed adjustments, and dehumidification mode.

Manual Controls and Indicators

Power and Fan Switches

Describes the function and operation of the POWER and CONTINUOUS FAN switches on the furnace upper panel.

Fault Indicators

Explains the use of LED indicators for fault detection, particularly for airflow restrictions.

Circuit Breaker

Details the location and function of the circuit breaker, including reset procedures.

Maintenance

Preventative Maintenance

Outlines recommended annual servicing and checks to prevent breakdowns and ensure optimal performance.

Motor Lubrication

Specifies that the blower motor is permanently lubricated and should not be oiled.

Air Filter

Covers air filter requirements, importance of clean filters, and specifications for Summeraire furnaces.

Warranty Information

Warranty Terms and Limitations

Details warranty periods, conditions, exclusions, and limitations for Summeraire furnaces.