Need help?Do you have a question about the Sun Oracle Netra T5440 and is the answer not in the manual?
General| Clock Speed | 1.2 GHz or 1.4 GHz |
|---|---|
| Form Factor | 4U Rackmount |
| Operating System | Oracle Solaris |
| Processor | UltraSPARC T2 Plus |
| Number of Cores | 8 cores per processor |
| Number of Threads | 64 threads per processor (8 per core) |
| Memory | Up to 256 GB |
| Network Interface | Four 10/100/1000BASE-T Ethernet ports |
| Power Supply | Redundant, hot-swappable power supplies |
Explains methods for low-level system interaction.
Describes default console access via management ports and service processor.
Outlines methods for accessing the server's service processor.
Details using the serial port to access the ILOM service processor.
Explains configuring the network port for system access.
Guides connecting to console via a terminal server.
Provides steps for console access using an alphanumeric terminal.
Details accessing console via a local graphics monitor.
Describes the ILOM service processor prompt and its interactions.
Explains the OpenBoot prompt and scenarios for its appearance.
Lists methods to reach the OpenBoot ok prompt.
Explains OpenBoot variables affecting console configuration.
Discusses ILOM session support and command prompt.
Guides on how to log in to the ILOM service processor.
Describes LED indicators on the server for status monitoring.
Explains standard LED behaviors and their assigned meanings.
Covers emergency procedures for systems using USB keyboards.
Describes system recovery from memory or PCI card failures.
Guides on enabling and disabling the ASR feature.
Explains how to manage devices via ILOM.
Explains RAID for data redundancy and performance.
Describes RAID 0 for striping data across disks.
Describes RAID 1 for data redundancy via mirroring.
Details hardware RAID operations using raidctl utility.
Provides steps to create a hardware mirrored volume.
Provides steps to create a hardware striped volume.
Describes mirrored disk hot-plug operation.
Guides nonmirrored disk hot-plug operation.
Explains Logical Domains software and its benefits.
Discusses storing and managing logical domain configurations.
Lists software required for Logical Domains.
Explains watchdog timer for detecting system hangs.
Details limitations of the watchdog timer mode.
Guides on using ntwdt driver for watchdog control.
Explains watchdog timer API using IOCTLs.
Details watchdog timer usage, including timeout settings.
Lists watchdog timer error messages and meanings.
Introduces libtsalarm for managing alarm status.
Describes OpenBoot variables in non-volatile memory.
To Next Page
