Need help?Do you have a question about the sunair R-9200 and is the answer not in the manual?
Lists detailed specifications like frequency range, channels, stability, modes, memory, and interfaces.
Describes basic operational procedures, including receiver setup and tuning.
Explains how to set up the receiver for different modes (USB, LSB, CW, AM) and adjust Automatic Gain Control (AGC).
Details the process of entering and selecting operating frequencies using the keypad and controls.
Describes how to use the tuning control for manual frequency adjustment and fine-tuning.
Details the procedure for loading pre-set channel frequencies into memory.
Explains how to use the built-in test equipment to diagnose faults and verify operation.
Details how to use the receiver scanning function to search for signals.
Details the theory of the microprocessor assembly, its control functions, and data bus operations.
Details the theory of the synthesizer assembly, its frequency generation capabilities, and PLL control.
Details the signal path through the receiver, from antenna input to audio output.
Details the procedure for removing the top or bottom covers to access the internal chassis.
Explains the Built-In Test Equipment (BITE) function for fault detection and diagnosis.
Lists receiver modules and potential faults associated with them.
Describes symptoms and troubleshooting steps for front panel faults.
Details faults related to the CPU assembly and their resolution.
Outlines troubleshooting for synthesizer module faults.
Covers faults related to the power supply assemblies and their correction.
Addresses faults associated with the Input/Output (I/O) assembly.
Details troubleshooting steps for audio-related faults.
Describes faults related to the Intermediate Frequency (IF) stages.
Covers troubleshooting for front-end circuitry faults.
Provides detailed troubleshooting procedures using the receiver's self-surveillance BITE system.
Troubleshoots DC power supply faults, including error indicators and corrective actions.
Troubleshoots AC power supply faults, including error indicators and corrective actions.
To Next Page
General