9
I
Jsivthees
SPRAY
MIST@
(Models 3020
&
3030
on/y)
The SPRAY MIST” feature dampens the fabric to aid
in removing wrinkles from heavy fabrics and for
setting creases.
To use the SPRAY MIST@ feature:
Press the SPRAY MIST’ button firmly,
SHOT OF STEAM” (Model
3030
only)
The SHOT OF STEAM” feature provides an extra
burst of steam for deep penetration of stubborn
wrinkles. You can use this feature while Dry or
Steam ironing, but the water reservoir must be
at least
l/4 full of water.
To Use the SHOT OF STEAM” Feature:
1.
Press the SHOT OF STEAM” button several
times to prime the pump.
2.
Place the iron on top of the wrinkle and press
the SHOT OF
STEAMO
button each time
you would like an extra burst of
steam.
The SHOT OF
STEAMO
feature may
be used continuously with just a
short pause between shots.
8
To Next Page
Loading...
Need help?
General
