4. Continue to turn the ice cube chamber
anti-clockwise until you can lift it out,
see figure 5.
5. Wash ice cube chamber in warm soapy
water.
Warning: Do not immerse the motor housing
in water or any other liquid.
Warning: Do not place any part of this
appliance in a dishwasher.
Assembling your Avalanche
1. Place one hand on the motor base to keep
the Avalanche stable. With the other hand
replace the ice cube chamber into the
unit and continue to turn in a clockwise
direction until firmly secure.
2. Lower the lid onto the Avalanche and
cafefully replace shaving blade, by
screwing the red screw anti-clockwise
until secure.
3. Position the snow catcher onto the
Avalanche.
Note: The stainless steel shaving blade should
not be screwed back in place until the upper
housing and ice cube chamber are secured.
Care and cleaning continued
Figure 5
6
To Next Page
Loading...
