EasyManua.ls Logo

Sunbeam WAM5000BK - Before Using Your Waffle Maker; Opening the Unit; Initial Cleaning and Seasoning

Sunbeam WAM5000BK
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Preparing WafflesAn Introduction to your Sunbeam
Shade Select Vertical Waffle Maker
Before using your Sunbeam Shade
Select Vertical Waffle Maker
Now you and the whole family can make
golden brown, fluffy waffles at home, using
your choice of delicious and imaginative
fillings & toppings.
Prepare waffles for breakfast or brunch and
pile them high with fresh fruits, whipped
cream or just plain butter and warmed
syrup.
With your Sunbeam Shade Select Vertical
Waffle Maker the unique upright pouring
funnel helps to prevent messy overflow,
giving you the perfect fill for perfect
waffles every time! Plus, the non-stick
grids make clean up easy. It's a great
addition to any kitchen.
1. Open unit by pressing the side button on
the handle and allowing the front waffle
plate to come forward.
2. Clean cooking plates with cloth or
sponge, dampened with hot, soapy
water.
CAUTION: Do not immerse unit in water.
Rinse with dampened cloth or sponge
and wipe dry.
3. Season the grid plates by applying a thin
coat of cooking oil onto the surface and
rub in with paper towel. Alternatively
add oil to paper towel and rub over the
grid plates. After this initial seasoning,
there is no need to season the plates
after each use.
Note: When using your Sunbeam Shade
Select Vertical Waffle Maker for the first
time, you may notice a fine smoke haze
being emitted. This is normal and is
due to the initial heating of the internal
components.
1. Close unit and plug into outlet.
CAUTION: During use or after use do not
touch the pouring funnel at the top of
the unit as it will be hot.
Touch the unit at the side handle or the
control panel only during use or directly
after use.
Cooking Tip: Select a darker shade when
cooking heavier and more dense batters.
2. Use the Shade Select dial to select your
desired waffle texture. The screen will
display the words "Pre-heating" whilst it
is increasing it's temperature.
The Waffle Maker will beep once it has
reached the correct temperature and the
screen will display "Ready to cook".
3. Fill the measuring cup up to the very
top with waffle batter and pour into the
pouring funnel. Use a spatula to ensure
all batter is poured into the unit. User
should be advised to use caution when
pouring batter into the unit as the top of
the pouring funnel is very hot.
CAUTION: Do not add more scoops of
batter. This will result in overflow and
give uneven results.
4. The control panel will count down the
time you have left to wait until your
waffles are ready.
5. When the timer is done, it will beep
and display "Cooking Complete" on
the display panel. This indicates that
the waffles are done. Press the release
button on the side handle to open the
front waffle plate.
CAUTION: The pouring funnel is
extremely hot!
6. Close unit and wait for the Pre-Heating
indication to come on before preparing
another waffle.
Note: Opening the Waffle Maker before
waffles are finished cooking will cause
waffle batter to separate, resulting in
torn waffles.
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
Side Button
OPEN
CLOSE
OPEN
CLOSE
OPEN
CLOSE
FLUFFY CRISPY
READY TO COOK

Related product manuals