Suncast GO3216 - User Manual

© sumcastr
ASSEMBLY INSTRUCTIONS GO3216 Golf Organizer
AX WARNING
e This product is for golf equipment.
° Not intended to be used partially assembled.
e Intended for residential use.
e Not to exceed loaded weight of 150 Ibs., evenly distributed
on the product.
° If part is broken, repair or replace at once.
Before you begin...
Read instructions prior to assembly. This product contains
parts that can be damaged if incorrectly assembled.
Please follow instructions. Suncast is not responsible for
replacing parts damaged due to incorrect assembly.
Assemble on a smooth, flat surface. For steps where parts are
placed upside down, place parts on a smooth surface to avoid
scratching finish. Hatten cardboard from carton to create a
smooth work surface.
1. Place the Bottom Panel so that mesh is on top. Position
the Lower Back Panel (Does NOT have Foam Tape)
facing forward, towards the Bottom Panel. Attach with
two longer screws and nuts to create the Base
Assembly.
Lower Back Panel
Quality Control No.
© 2008 Suncast Corporation, Batavia, IL O660008A

Suncast GO3216 Specifications

General

Brand	Suncast
Model	GO3216
Category	Organizer
Language	English