4
Back View
Vue Arrière
Vista Trasera
3
Flip the crank handle grip down until it snaps into its locked
position. Your hose reel is now ready to use. To fold the grip
back into the crank handle, press the tab on the back of the
handle and fold the handle grip upward.
Depending on usage and water hardness, the in-tube and out-tube connections may become
worn and start to leak. Check the following regularly to maintain water tight connections:
1. Check that washers are in place and not worn. Replace the washers, if necessary.
2. Check that all connections are tight. If the hose reel still leaks, replacement of the in-tube and
out-tube may be necessary. To purchase replacement parts, contact us at www.suncast.com or
call 1-800-846-2345.
Appearance may vary by model.
Using Your Hose Reel (cont.)
Staking the frame to the ground is highly recommended (where applicable) – Refer to your specific unit for location
and size of any staking holes. Stakes are not included in some models. Consult local hardware store for staking options.
WPT150
SMT212
SMW212
WST150
Maintaining a Water Tight Connection
To Previous Page
Loading...
