Sunfire TGR-3 - Page 4

Sunfire Theater Grand III & Ultimate Receiver RS232 Commands
Page 4 of 5 Thursday, January 08, 2004
VOL ABSOLUTE Z2 ‘*13V’ + 2 EXT. Zone Set Volume Level Absolute
‘*11U00’ MEANS ZERO VOLUME, 99=MAX VOL.
Limited by Zone 2 Max Volume Setting on Menu
CD Z2 ‘*138’ Zone 2 Source CD
TAPE Z2 ‘*139’ Zone 2 Source TAPE
SAT Z2 ‘*13A’ Zone 2 Source SAT
DVD Z2 ‘*13B’ Zone 2 Source DVD
PHONO Z2 ‘*13C’ Zone 2 Source PHONO
TUNER Z2 ‘*13D’ Zone 2 Source TUNER
VID1 Z2 ‘*13E’ Zone 2 Source VID1
VCR Z2 ‘*13F’ Zone 2 Source VCR
VID2 Z2 ‘*13G’ Zone 2 Source VID2
MAIN COPY Z2 ‘*14A’ Zone 2 Source MAIN COPY
MENU ‘*141’ Menu (Brings up on-screen menu)
UP ARROW ‘*142’ Up Arrow (Same as up arrow on remote)
DOWN ARROW ‘*143’ Down Arrow (Same as down arrow on remote)
RIGHT ARROW ‘*144’ Right Arrow (Same as right arrow on remote)
LEFT ARROW ‘*145’ Left Arrow (Same as left arrow on remote)
ENTER ‘*146’ Enter/Select (Same as ‘enter’ on remote)
EXIT ‘*147’ Exit (Exit the on-screen menu)
AMP ON ‘*14D’ (Ultimate Receiver Only) Receiver Amp On
AMP OFF ‘*14E’ (Ultimate Receiver Only) Receiver Amp Off
AMP AUX SURB ‘*14F’ (Ultimate Receiver Only) Receiver Amp Aux Channels to
Surround Back
AMP AUX SIDE ‘*14G’ (Ultimate Receiver Only) Receiver Amp Aux Channels to Side
Axis
AMP AUX ZONE2 ‘*14H’ (Ultimate Receiver Only) Receiver Amp Aux Channels to Zone 2
GET TUNER FREQ ‘*14J’ Returns Tuner Frequency and Band with an ASCII string response
of the format:
‘*14Jbbfffff’, where:
bb: Band: ‘AM’ or ‘FM’
fffff: Frequency in kHz.
GET MAIN VOL LEVEL ‘*14K’ Returns Main Volume Level with an ASCII string response of the
format:
‘*14Kxx’, where:
xx: 00 = -96 dB ... 50 = -48 dB ... 99 = 0 dB
GET ZONE 2 VOL
LEVEL
‘*14L’ Returns Zone 2 Volume Level with an ASCII string response of
the format:
‘*14Kxx’, where:
xx: 00 = -96 dB ... 50 = -48 dB ... 99 = 0 dB
GET MAIN ZONE
STATUS
‘*14M’ Returns Main Zone Status with an ASCII string response of the
format: ‘*14MPxSxDxPxxMxVxxIxxOxx’, where:
P – Power State, where ‘x’: 0=off, 1=on.
S – Source, where ‘x’: 0=CD, 1=TAPE, 2=TUNER,
3=PHONO 4=8CHAN, 5=VCR, 6=VID2, 7=VID1,
8=SAT, 9=DVD.
D – Active Decoder, where ‘x’: 0=Source Direct, 1=Analog,
2=PCM Digital, 3=Dolby Digital, 4=DTS.