Congratulations on your Sunforce Purchase. This product is designed to the highest technical specifications
and standards. It will supply years of maintenance free use. Please read these instructions thoroughly prior
to installation, then store in a safe place for future reference. If at any time you are unclear about this product,
or require further assistance please do not hesitate to contact our trained professionals operating the
customer support line 1-888-478-6435 or email to info@sunforceproducts.com
The Solar Garden Light is a green energy, environmentally friendly and energy-saving solar product. It is
powered by its built-in solar cell, which transfers natural sunlight into electricity. The Solar Garden Light
looks great and can be used to decorate and light your garden, park and pathway.
How does it work?
The Solar Garden Light is a maintenance free product. No wiring is needed for installation. It uses a solar
cell on top of the unit to charge 1 built-in 1.2V 600mAh rechargeable battery, which supplies power to a
super bright LED. This Solar Garden Light turns on at night and off during the daytime according to the
natural light outside.
Before installation, please check the package; make sure that all parts are present. The package contains:
(Sea Fig. A)
1. 6 head caps 3. 12 columned mounting stakes
2. 6 light covers 4. 6 spikes
Installation Instruction
1. Connect mounting stakes and insert the spike into the ground deep enough to fix the Solar Garden Light
firmly. (See Fig. B1)
2. Twist the light cover counter clockwise and remove it from the head cap. (See Fig. B2)
3. Push the switch into the ON position. (See Fig. B3)
4. Retighten the light cover to the head cap. (See Fig. B4)
5. Place the whole main body onto the mounting stake.
6. Adjust direction to ensure maximum sun exposure.
To Next Page
Loading...