Sungrow SG33CX-P2 User Manual

86
figure 7-16 Regular Parameters Setting
7.6.3 Power Regulation Parameters
Active Power Regulation
Tap “Settings→Power Regulation Parameters→Active Power Regulation” to enter the
screen, as shown in the following figure.
figure 7-17 Active Power Regulation
table 7-9 Active Power Regulation
Parameter
Definition/Setting
Description
Range
Active power soft start
after fault
The switch for enabling/dis-
abling the soft start function
after a fault occurs.
Enable/Disable
Active power soft start
time after fault
Time that the soft start takes to
raise the power from 0 to
100% rated power.
1s~1200s
7 iSolarCloud App User Manual

Sungrow SG33CX-P2 Specifications

General

Brand	Sungrow
Model	SG33CX-P2
Category	Inverter
Language	English