www.sunheater.com
Kit Qty Item # Description
1 SCPNL220 2’ x 20’ (610 cm x 6.1 m) Polypropylene Solar Collectors
1 SC018HSE 18” (45 cm) Plastic Flex Hose
1 Limited Warranty
SK-32 System Kit for S220
2 SCELBOW Elbow Connectors
2 SC150TEC PVC End Caps 1 1/2” (38 mm) FPT
2 SC125CLMP 1 1/4” (31.75 mm) Stainless Steel Hose Clamps 35-51
1 SCTEFTAPE Teflon Tape 1/2” (12.7 mm)
1 Installation Manual
SK-32
SC018HSE
Product # S220 Kit Components
SunHeater collectors are manufactured with
special molds and materials designed to
provide you with the most durable, high
performance solar pool heating system
available. Note: during manufacturing certain
mechanical incisions are required to
complete the assembly of the collector (see
photos on right). These are normal and do
not adversely affect the performance or
durability of your SunHeater.
Please Note: Small
holes in collector (see
photo at right) are NOT
to be used for mounting.
Use only the SunHeater
mounting kit SK43 and
follow the directions
provided. Failure to
comply will void your
warranty.
To Next Page
Loading...