sunjoe AJV1000 - Use the 2-in-1 Nozzle + Brush attachment

3. Remove the HEPA lter from the dust tank (Fig. 5).
4. Discard the debris and dust from the dust tank according
to local laws and regulations (Fig. 5).
5. Reassemble the lter and the dust tank when all debris/
dust are removed. Insert the HEPA lter inside the dust
tank, and reattach the dust tank to the vacuum. Push in
and turn the tank counterclockwise until it locks in place
(Fig. 7).
Use the 2-in-1 Nozzle + Brush
attachment
The included 2-in-1 nozzle + brush attachment is suitable for
cleaning small areas and collecting ne dust. To use the nozzle
+ brush attachment, follow the instructions below.
1. Turn o the vacuum and wait until it completely stops.
2. Insert the 2-in-1 nozzle + brush attachment into the
vacuum nozzle, press rmly until it's locked in place (Fig.
8)
Fig. 4
Dust tank
Twist clockwise1
Pull out
2
Fig. 5
Dust tank
HEPA lter
Fig. 6
Fig. 7
Dust tank
HEPA lter
Insert in
1
Twist
counterclockwise
2
8