sunjoe MJ401E - Grass Bag Assembly + Fitting

7
Grass Bag Assembly + Fitting
1. Fit the support rod into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine (Fig. 4).
2. Place the protective plastic straps onto the support rod
(Fig. 5).
3. Raise the spring loaded ejector ap and move the grass
bag up to the mower body. Fasten it onto the coupling
hooks (Fig. 6).
4. Release the ejector ap to secure the grass bag in
position (Fig 7).
Features
Safety lock button (A): Used to engage the switch.
Switch lever (B): Used to start and stop the mower.
Grass bag (C): Used to collect mowed clippings.
Fig. 4
Support rod
Plastic
cover
Fig. 5
Support rod
Protective
plastic
straps
Fig. 6
Ejector ap
Grass bag
Fig. 7
Ejector ap
Grass bag
START
STOP
Fig. 8
Switch lever (B)
Safety lock
button (A)
Fig. 9
Grass bag (C)