This document provides assembly instructions and safety guidelines for a gazebo, identified by ITEM#: A102007202.
Function Description:
The device is a gazebo, designed for domestic outdoor use. Its primary functions are decorative and to provide sunshade. It is not intended to withstand harsh weather conditions such as high winds, heavy rain, or snow. The gazebo is a freestanding structure and should not be considered part of a building or house structure.
Important Technical Specifications:
The manual outlines various components and hardware required for assembly. Key structural components include:
- Posts (08): 4 units, P000200227
- Arc Supports (10, 11): 4 units each, P000500200 and P000500201 respectively.
- Outer Left/Right Beams (03, 04): 4 units each, P000400508 and P000400509 respectively.
- Inner Long/Short Beams (05, 06, 21): 4 units each, P000400510, P000400512, and P000400960 respectively.
- Base Cover (A): 4 units, P00610021602
- Base (B): 4 units, P00010025802
- Slanting Beam Connector (F): 4 units, P00050024802
- Middle Beam Connector (D): 4 units, P00050025102
- Big Roof Short Connector Tube (J): 4 units, P00050157401
- Big Roof Sloping Beam (K): 4 units, P00060197102
- Big Roof Middle Beam (L): 4 units, P00060198302
- Left/Right Mosquito Netting Rod (AF, AG): 4 units each, P00570034502 and P00570034602 respectively.
- Small Roof Oblique Beam (N): 4 units, P00060105901
- Small Roof Connector (AU): 1 unit, P00050156501
- Small Roof TopBeam (Short Side) (Q): 4 units, P00060196201
- Hook (R): 1 unit, P005800001
- Small Roof Panel (S): 4 units, P00070094501
- Small Roof Inclined Beam Cover (U): 4 units, P00080019101
- Top Cover (AV): 1 unit, P00090015401
- Big Roof Top Beam (Upper/Middle) (W, Y): 8 units each, P00060198902 and P00060199902 respectively.
- Big Roof Panel Flashing (Short Side) (AB, AC): 4 units each, P00060201202 and P00060201603 respectively.
- Big Roof Big Left/Right Panel (AM, AN): 4 units each, P00070102102 and P00070102602 respectively.
- Big Roof Middle Left/Right Small Panel (AP, AQ): 4 units each, P00070101402 and P00070101602 respectively.
- Big Roof Left/Right Small Panel (AR, AS): 4 units each, P00070101002 and P00070101202 respectively.
- Big Roof Inclined Beam Cover (AT): 4 units, P00080034403
Hardware includes various bolts (M6, M8, M10), screws (ST4.8, ST8, ST9.5), flat washers (M8, M10), non-slip nuts (M10), T-nuts (M8), an M3 drill, stakes, and wrenches (M6, M10, Allen Key M8).
Usage Features:
- Outdoor Use: Specifically designed for domestic outdoor environments.
- Placement: Must be placed on flat, horizontal ground.
- Clearance: Requires a minimum of 6 feet (1.8 meters) clearance from any structures or obstructions (fences, garages, houses, overhanging branches, laundry lines, electrical wires).
- Anchoring: Must be anchored to the ground for safety. It is advised to build the gazebo on a wooden deck or concrete ground for stability, ensuring a strong foundation. Appropriate floor plugs (not provided) are recommended for anchoring.
- Multiple Gazebos: If setting up more than one gazebo, maintain a minimum distance of 10 feet (3 meters) between them.
- Assembly Manpower: Some structures may require two or more people for safe installation. The manual specifically indicates "5 people" as needed for assembly.
- Tools (not included): Cordless drill, hammer, screwdriver, ladder.
- Safety Precautions:
- Do not place under electrical lines.
- Keep children and pets away during assembly.
- Small parts can be swallowed by children.
- Keep fingers away from pinch/trap points.
- Do not assemble if any parts are missing.
- Wear protective gloves due to potentially sharp edges on some parts.
- Do not light fires inside or near the product.
- Do not hang heavy weights on the roof frame.
- Do not climb onto the roof of the gazebo.
- Assembly Tips:
- Read and understand the manual before assembly.
- Ensure all parts are present by comparing with the packaging contents list.
- When assembling wooden parts, do not overtorque bolts to prevent splitting the wood.
- Lay out all parts in a cleared area before beginning.
- Retain packing materials until assembly is complete.
- Use a level to ensure proper alignment.
- Check for square assembly before tightening bolts.
- Measure distances (e.g., d1=d2 in Step 8) to ensure a square frame and right angles.
Maintenance Features:
- Rust Prevention: Steel components are treated with rust inhibiting paint. However, due to the nature of steel, surface oxidation (rusting) will occur. This is not a defect and is not covered by the warranty.
- Scratch/Damage Repair: For minor scratches or damage, immediate touch-up with rust inhibiting paint is recommended.
- Rust Removal: Surface rust can be easily removed with a light application of common cooking oil. If surface oxidation (rusting) occurs and is not measured to prevent this, the oxidation may start dripping on to deck or patio and cause damaging stains, which may be difficult to remove. This can be prevented if the above-mentioned measures are taken to keep the product from oxidizing.
- Cleaning: Use a damp cloth to wipe off stains as quickly as possible. If necessary, wash with a mild solution of soap and water; rinse thoroughly and dry completely.
- Hardware Check: Periodically check all nuts and bolts to ensure they are tightened.
- Parts Replacement: Repairing and replacing parts should be done by a qualified technician.
- Storage: Retain the original packaging to store the gazebo when not in use.
Limited Manufacturer's Warranty:
Sunjoy Group warrants to the original purchaser that the item is free from defects in workmanship and materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time of purchase and is maintained with care and used only for personal, residential purposes. Any manufacturing defect arising within this warranty period, Sunjoy Group will replace (at their option) any defective merchandise or parts. Upon proof of purchase, Sunjoy Group will deliver costs, as well as payments to a third party for assembly or disassembly of the item, remain the responsibility of the purchaser. A purchaser of an "open box," previously-returned, or "clearance" item, as well as original purchasers outside of the warranty period, may obtain replacement parts from Sunjoy Group for products in current production, at nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color, or a similar style and color if the original is unavailable or has been discontinued. Some states do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.
Need help?
General
To Next Page