SunL SLGK-150 - Gear-engaging Device Operation; Control Panel and Ignition System

SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
☆ Gear-engaging Device
Gear-engaging
Device
Forward Gear
Backward Gear
If there is gear-engaging device in your Kart, you
must make clear the function and operating ways of
each gear so that you can avoid the danger arising from
the unexpected running.
The back gear device for single seat kart is located
at framework of right of the seat and the back gear
device for double seats is located at the right and lower
part of Steer Wheel.
The gear-operating ways for the engine are as
follows:
Move the handle backward and locate the gear pole
at the back gear, the kart will go backward.
▲Warning：
Attention：you must stop when conduct gear changes.
☆ Control Panel (Ignition Key and Blanket Switch)
1.Ignition Key 2.Cutout 3.Headlamp 4.Turn signal
Switch 5.Horn Switch
☆ Ignition Key
Turn the Ignition Key clockwise to the first gear and
Braking Indicator will be on.
Engine-start: Electric Start (Ignition Key is on
Control Panel)，you can start the engine by turning
Ignition Key clockwise to the second gear.
☆ Blanket Switch
If you want to stop the engine, you can press the
red Blanket Switch until it stops.