Sunn 215 User Manual

R
Your new Sunn 215 Bass speaker enclosure is constructed from 3/4”
(1.9 cm) 7-ply Birch Maple Plywood and is capable of handling up to 300
Watts of powerful clean sound. The Sunn 215 features two 15” (38.1cm)
speakers with 56 oz (1.6 kg) magnets and is designed for use with the Sunn
1200S, the Sunn 300T or any other professional quality bass amplifier. In
order to more fully understand the operational characteristics of your Sunn
215 Bass speaker enclosure, please read through all instructions and heed
all caution and safety warnings on both your amplifier and Sunn 215 Bass
speaker enclosure.
CONNECTING MULTIPLE 215 BASS SPEAKER ENCLOSURES
Because the Sunn 215 Bass Speaker Enclosure’s jacks are wired in
parallel, multiple 215 cabinets can be “daisy chained” together providing
additional output for larger venues. To do so, simply connect them by
inserting a speaker cable (16 gauge or larger) with a 1/4” plug into the input
jacks on the rear panel of each cabinet. Note: If using a tube amplifier, your
tube amp could fall into protect mode or even be damaged by using an
improper impedance load. Therefore, it is important to heed all caution and
safety warnings on both your amplifier and Sunn 215 Bass speaker enclosure.
SPECIFICATIONS
PART NUMBER 021-1674-000
DRIVERS Two 15 “ (38.1 cm) Steel Frame Woofers
2.5” (6.4 cm) voice coils
56 ounce (1.6 kg) magnets
CABINET 3/4 “ (1.9 cm) 7-ply Birch Maple Plywood
SENSITIVITY 96 dB, 1 Watt - 1 Meter
POWER HANDLING 300 Watts
IMPEDANCE 8Ω
CONNECTIONS Dual, Parallel Wired, 1/4” High Current Input Jacks
ENCLOSURE VOLUME VB = 7.3 ft
3
(2.66 m
3
)
DIMENSIONS
Height: 41” (104 cm)
Width: 25.5” (65 cm)
Depth: 17” (43.2 cm)
WEIGHT 93 lbs. (42.2 kg)
P/N 051959
THE SUNN
®
215 BASS SPEAKER ENCLOSURE
A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
051347
power rating
300W
impedance
8Ω
R
051347
power rating
300W
impedance
8Ω
R
From
AMP

Sunn 215 Specifications

General

Brand	Sunn
Model	215
Category	Enclosure
Language	English

Summary

Connecting Multiple Sunn 215 Bass Speaker Enclosures

Daisy Chaining

Connect multiple 215 cabinets in parallel via 1/4" plugs for increased output. Caution advised with tube amps.

Sunn 215 Bass Speaker Enclosure Specifications

Part Number

Unique identifier for the product model.

Speaker Drivers

Details about the two 15" steel frame woofers, voice coils, and magnets.

Cabinet Construction

Constructed from 3/4" 7-ply Birch Maple Plywood.

Sensitivity Rating

96 dB efficiency measured at 1 Watt input over 1 Meter distance.

Power Handling Capacity

Capable of handling up to 300 Watts of power.

Impedance Value

The enclosure has an impedance of 8 Ohms.

Input Connections

Features dual, parallel wired, 1/4" high current input jacks.

Enclosure Volume

The internal volume is 7.3 cubic feet (2.66 cubic meters).

Dimensions

Physical measurements: Height 41", Width 25.5", Depth 17".

Weight

The total weight of the enclosure is 93 lbs (42.2 kg).