Sunn 300T - Sunn 300 T Specifications; General and Power Requirements; Preamp Section Specifications; Graphic EQ and Compressor Specs

A PRODUCT OF:
FENDER MUSICAL INSTRUMENTS CORP.
CORONA, CA 91720 USA
P/N 053937 REV A
SUNN
®
300T SPECIFICATIONS
TYPE: PR 347
PART NUMBER: 21-3302 (120V)
21-3332 (240V) Aust
21-3342 (230V)UK
21-3362 (230V) Eur
21-3372 (100V)
POWER REQUIREMENTS: 100V AC, 50/60 Hz 900W
120V AC, 60 Hz, 900W
230V AC, 50 Hz, 900W
240V AC, 50 Hz, 900W
PREAMP SECTION
INPUT IMPEDANCE: 470kΩ
FULL POWER SENSITIVITY : 12mV
TONE CONTROLS: Treble: +/-15 dB @ 6kHz
Bass: +/-15 dB @ 40Hz
GRAPHIC EQUALIZER: +/-12 dB @ 31.5Hz, 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz,
4kHz, 8kHz, 16kHz.
MID NOTCH: -20 dB @ 700Hz
LOW BOOST: +10 dB @ 40Hz
HIGH BOOST: +10 dB @ 6kHz
COMPRESSOR
CROSSOVER: 400Hz
RATIO: 1:1 Min to 4:1 Max
LINE OUT LEVEL: +6dB referenced to input (pre), 0dBV (post).
(TRANSFORMER BALANCED)
POWER AMPLIFIER SECTION
INPUT IMPEDANCE: 20kΩ
POWER OUTPUT: 300W R.M.S. into 2, 4, or 8Ω @ <3% T.H.D.
SENSITIVITY : 1V R.M.S. (0dBv)
SPEAKER COMPLIMENT: Designed for use with the Sunn 410H or Sunn 215 Bass
Loudspeaker Enclosures
DIMENSIONS: Height: 10.1 in 25.7 cm
Width: 25.5 in 64.8 cm
Depth: 15.6 in 40 cm
WEIGHT: 75 lbs 34 kg
SUNN
®
is a registered trademark of Fender Musical Instruments
Corporation.
Product specifications are subject to change without notice.