To Next PageTo Next PageWhy is my Sunny Health & Fitness Exercise Bike making a squeaking noise?
If your Sunny Health & Fitness Exercise Bike is making a squeaking noise, it might be due to loose bolts. Inspect all bolts on the bike and tighten any that you find are not secure.
What to do if there is no display on my Sunny Health & Fitness SF-B2618 computer?
If the computer display on your Sunny Health & Fitness Exercise Bike isn't working, here are a few things to try: * First, remove the computer and check the wire connections between the computer and the main frame to ensure they are properly connected. * Next, verify that the batteries are correctly positioned and that the battery springs are making good contact with the batteries. * Finally, the batteries themselves might be the issue. Try replacing them with a fresh set.
How to stop my Sunny Health & Fitness SF-B2618 Exercise Bike from wobbling?
If your Sunny Health & Fitness Exercise Bike wobbles during use, adjust the end cap on the rear stabilizer to level the bike. Turn the end cap as needed until the bike is stable.
General| Resistance | Magnetic |
|---|---|
| Weight Capacity | 275 lbs |
| Adjustable Seat | Yes |
| Adjustable Handlebars | Yes |
| Display | LCD |
| Flywheel Weight | 40 lbs |
| Drive Mechanism | Belt Drive |
| Transportation Wheels | Yes |
| Seat Type | Padded |
| Drive System | Belt Drive |
| Heart Rate Monitoring | No |
| Type | Exercise Bike |
Consult physician before exercise; be aware of body signals and stop if symptoms occur.
Ensure adult use, stable surface, adequate space, proper clothing, and no obstructions.
Regularly check for loose parts, damage, or unusual noises; discontinue use if issues arise.
Adhere to maximum weight capacity and avoid therapeutic use.
Details of included nuts, washers, bolts, and tools for assembly.
Attach front and rear stabilizers to the main frame using specified hardware.
Insert rotation rod and attach handrail arms to the main frame.
Install left and right pedals onto the cranks with bushings, spacers, and lock nuts.
Mount the seat to the slider, attach slider to seat post, and secure post to the frame.
Connect the sensor wire to the computer and install the computer into the main frame.
Control resistance level by rotating the tension control knob.
Tilt the bike to engage movable wheels for transport.
Clean with a soft cloth; avoid abrasives and excessive moisture on the display.
Store the bike in a clean, dry environment away from children.
Operate the computer by selecting functions (Time, Speed, Distance, Calories) and modes.
Computer powers on with activity or button press and shuts off after inactivity.
Uses two AA batteries; replace if display is improper or unreadable.
