Do you have a question about the Sunnydaze Decor PHOEBE HANGING CHAIR and is the answer not in the manual?
Color | Brown |
---|---|
Assembly Required | Yes |
Weather Resistance | Yes |
Included Accessories | hanging chain, cushion |
Material | Polyethylene rattan wicker |
Align seat sections with the top of the hanging chair and secure using specified bolts.
Use M6x45mm Bolt Sets to firmly attach seat sections to the top section.
Reinforce seat sections attachment using three M6x45mm Bolt Sets.
Connect the Carabiner with Chain to the top of the hanging chair.
Slide legs into the bottom pole, align holes, and secure with M8x20mm Bolt Set.
Join top and bottom poles, securing with M8x55mm Bolt Set and tightening hardware.
Place pin into top pole, insert extension spring, and hang chain onto the spring.
Wrap safety strap around bottom pole and chair frame, connecting buckles to tighten.
Tie the pillow and seat cushions onto the chair frame and adjust placement.
Details on vacuuming, spot-cleaning cushions, and washing fabric with mild detergent.
Instructions for laying flat, squeezing water, and air-drying cushions and pillows.
Prohibits swinging, bouncing, and excessive movements to prevent injury.
Advices on storing cushions indoors and cleaning to maintain fabric.
Ensures chair and stand are correctly assembled and hardware is tightened before use.
Emphasizes supervising children at all times and not allowing them to play or sleep in the chair.
Recommends storing the chair indoors in cool, dry locations and covering it.
Tips on wiping scratched areas to prevent rust and notes on warranty voiding.