To Next PageTo Next Page
Need help?Do you have a question about the SunPower X Series and is the answer not in the manual?
General| Type | Monocrystalline |
|---|---|
| Manufacturer | SunPower |
| Power Output | Up to 400 W |
| Efficiency | Up to 22.8% |
| Temperature Coefficient | -0.29%/°C |
| Warranty | 25 years |
| Weight | 19 kg |
| Model | X22 |
Product meets IEC standards for PV modules for building installation.
Module limited warranties are described in the Maxeon warranty document.
Refer to regional and local codes for grounding PV arrays and mounting frames.
Modules may be wired in series to produce the desired voltage output.
Modules may be combined in parallel to produce the desired current output.
Modules must be mounted in locations meeting specific temperature and shading requirements.
Performance Series modules designed for landscape orientation for better shading and soiling performance.
Mounting system must provide a flat plane and not cause stress on modules.
Environmental and installation parameters affect bifacial gain, such as albedo and irradiance.
Bifacial modules use reflected sunlight; recommended for flat roof applications.
Overall bifacial gain determined by albedo, irradiance, tilt angle, shading, and elevation.
Avoid abrasive surfaces, protect from liquids, use gloves for AR glass, do not lift by cables.
