Need help?Do you have a question about the Sunshine DT-17N and is the answer not in the manual?
Lists display type, max display, sampling rate, overload/low voltage indication, environment, power, dimensions, and accessories.
Details accuracy, performance metrics, and a table of supported functions by model.
Specification table for DC voltage measurement including range, accuracy, resolution, input impedance, and overload protection.
Specification table for AC voltage true RMS measurement including range, accuracy, resolution, input impedance, and frequency response.
Specification table for DC current measurement including range, accuracy, resolution, and overload protection.
Specification table for AC current measurement including range, accuracy, resolution, and overload protection.
Details specifications for resistance measurement, including ranges, accuracy, resolution, open circuit voltage, and overload protection.
Details specifications for capacitance measurement, including ranges, accuracy, resolution, and overload protection.
Details specifications for frequency measurement, including ranges, accuracy, resolution, and input sensitivity.
Details specifications for diode forward voltage drop and continuity testing, including display values and test conditions.
Details specifications for temperature measurement in Celsius and Fahrenheit, including ranges, accuracy, and resolution.
Identifies and describes the function of each control and display element on the multimeter's front panel.
Step-by-step guide on how to perform DC voltage measurements, including lead connection and range selection.
Step-by-step guide on how to perform AC voltage measurements, including lead connection and range selection.
Step-by-step guide on how to perform DC current measurements, including lead connection and range selection.
Step-by-step guide on how to perform AC current measurements, including lead connection and range selection.
Step-by-step guide on how to perform resistance measurements, including lead connection and range selection.
Step-by-step guide on how to perform capacitance measurements, including lead connection and range selection.
Step-by-step guide for testing diodes and checking for continuity, including lead connection and selection.
Step-by-step guide on how to perform frequency measurements, including lead connection and range selection.
Instructions on how to use the data hold function and control the backlight of the display.
Explanation of the automatic power-off feature and how to disable it.
General| DC Voltage Range | 200mV/2V/20V/200V/1000V |
|---|---|
| Resistance Range | 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Data Hold | Yes |
| Display | LCD |
| Maximum Display | 1999 |
| AC Voltage Range | 200V/750V |
| DC Current Range | 2mA/20mA/200mA/10A |
| AC Current Range | 2mA/20mA/200mA/10A |
| Capacitance Range | 2nF/20nF/200nF/2μF/20μF/200μF |
| Frequency Range | 20kHz |
| Temperature Range | -20°C to 1000°C |
| Battery Type | 9V |
| Safety Rating | CAT III 600V |
| Power Supply | 9V |
To Next Page