SunStar Fortuna 5 Series - Page 67

HuiiBtar
(5) Group E Parameters: Parameters relating to change functions of each needle pair
STEP 001;
STEP 002:
STEP 003:
STEP 004;
STEP 005:
STEP 006;
STEP 007:
STEP 008:
STEP 009:
STEP 010:
STEP 011:
not used
not used
not used
not used
not used
not used
not used
not used
STEP 001:
STEP 002:
STEP 003:
STEP 004:
STEP 005;
STEP 006:
STEP 007:
STEP 008:
STEP 009;
STEP 010:
STEP 011;
STEP 012:
STEP 013:
STEP 014:
STEP 015;
STEP 016:
not used
not used
not used
not used
Function
Enter strlch count for side 1.
Select a change at the beginning of the first comer.
Enter stitdi count at the beginning of the first comer.
Enter stitch count at the end of the fi rst comer.
Select a change at the end of the fi rst comer.
Enter stitch count for side 2.
Select a change at the beginning of the second earner.
Enter stitch count at the beginning of the second comer.
Enter stitch count at the end of the secand comer.
Select a change at the end of the second comer.
Enter stitch count for side 3.
Initial Value
Enter stitch count for side 1.
Select a change at the treginning of the first comer.
Enter stitch count at the beginning of the fi rst comer.
Enter stitch count at the end of the first comer.
Select a change at the end of the fi rst comer.
Enter stitch count for side 2.
Select a change at the beginning of the second comer.
Enter stitch count at the beginning of Uie second comer.
Enter stitch count at the end of the second comer.
Select a change at the end of the second comer.
Enter stitch count for side 3.
Select a change at the beginning of the 3 comer.
Enter stitch count at the beginning of the 3 comer.
Enter stitch count at the end of the 3 comer.
Select a change at the end of the 3 comer.
Enter stitch count for side 4.
A
Changing set values without Uiorough understanding of parameter details may lead to machine breakdown or
physical damage. Users are recommended to have a full understanding of functions before use.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com