13
[Fig. 2]
[Fig. 3]
[Fig. 4]
B. Attach the safety plate to the face plate.
ⓐ You should attach it for sure to prevent
from safe accident.
ⓑ Be careful when you start operation.
Otherwise, fingers or hand might be hurt at
the upper feed plate accidentally.
C. Connect a plug of pedal switch with control
box.
[ Caution ]
You can be hurt by the dropping device
during installation so be careful about it.
D. Install a thread stand on the table.
Face Plate
Safety Plate
Pedal switch
To Next Page
Loading...
