Form 43343320
Aug 2012 -5-
5.0) SPECIFICATIONS
Model No.
Model No.Model No.
Model No.
Btu/hr
Btu/hrBtu/hr
Btu/hr
Input
InputInput
Input
Combustion Air
Combustion Air Combustion Air
Combustion Air
Plate
PlatePlate
Plate
Part #
Part #Part #
Part #
Orifice Size
Orifice SizeOrifice Size
Orifice Size
Minimum *
Minimum *Minimum *
Minimum *
Mounting Height
Mounting HeightMounting Height
Mounting Height
Turbulator
Turbulator Turbulator
Turbulator
Qty.
Qty.Qty.
Qty.
Natural Gas
Natural GasNatural Gas
Natural Gas
Propane Gas
Propane GasPropane Gas
Propane Gas
Horizontal
HorizontalHorizontal
Horizontal
45º Angle
45º Angle45º Angle
45º Angle
SPS/SPU 100 100,000
#44140062 #12 (0.189))
#32 (0.116)
14 ft. 13 ft. 3
SPS/SPU 125 125,000
#44140066 #4 (0.209)
#30 (0.129)
14 ft. 13 ft. 7
SPS/SPU 150 150,000
#44140067 “A” (0.234)
#27 (0.144)
15 ft. 14 ft. 4
* MOUNT HEATERS AS HIGH AS POSSIBLE. Minimums are shown as a guideline for human comfort and uniform
energy distribution for complete building heating applications. Consult your SunStar representative for the
particulars of your installation requirements.
Gas
GasGas
Gas
Gas Pipe
Gas PipeGas Pipe
Gas Pipe
Connection
Connection Connection
Connection
Diameter
DiameterDiameter
Diameter
Connec
ConnecConnec
Connection
tiontion
tion
1
11
1
Fresh Air
Fresh Air Fresh Air
Fresh Air
Connection
ConnectionConnection
Connection
1
11
1
Electrical
ElectricalElectrical
Electrical
Supply
SupplySupply
Supply
Current
CurrentCurrent
Current
Rating
RatingRating
Rating
Natural
or Propane
½” MPT
(Male) 4” 4” Round 4” Round
120 Volt,
1 Phase 1.74 Amp
1
See Section 16.0) for vent sizes when multiple heaters are connected into a common vent
Module Electrical Rating:
Module Electrical Rating:Module Electrical Rating:
Module Electrical Rating:
Ignition System (direct spark):
Ignition System (direct spark):Ignition System (direct spark):
Ignition System (direct spark):
transformer)
Input Power-Line: 120 VAC (L1, IND contacts only)
Gas Valve Rating: 2.0 A @ 24 VAC (max.)
Combustion Blower Rating: 3.0 FLA @ 120 VAC
0.0233 H.P. Motor
Flame Sensitivity: 0.7 microamps minimum
15 second trial for ignition period
15 second pre-purge period
60 second inter-purge period
30 second post-purge period
3 tries for ignition (separate flame sensor).
6.0) PACKING LIST
A.
A.A.
A. SPS
SPSSPS
SPS/
//
/SPU
SPUSPU
SPU
Burner Package
Burner PackageBurner Package
Burner Package
Part Description
Part DescriptionPart Description
Part Description
Burner Box Assembly (Refer to the following chart for Package Part Numbers)
..........................
4”ID x 4”Lg Flue Adapter Collar (#30504500)
................................
................................
r Box Attachment/Flue Adapter Collar (#42907040)
................................
Drilling Screws (#02189020)
................................
................................
................................
................................
................................
Turbulator 24” Long (#44152240) *See chart above for required quan
..............................
Installation & Operation Instructions
................................
................................
................................
................................
................................
................................
.........................
Gas connector 5/8” OD x 36”
................................
................................
200M BTU models only
200M BTU models only200M BTU models only
200M BTU models only