28
Point Stitching
Normal Stitching
Zigzag Stitching
Reverse Stitching
Multi Stitching
Delete Sewing Data
Use the mouse point to input one stitch of
sewing data.
Create sewing data through the selected
configuration data.
Create zigzag sewing data through the
selected configuration data.
Use the selected configuration data to create the
inverse sewing data as many as creations.
Use the selected configuration data or sewing
data to create sewing data as many as the
designated offsets and number.
Delete the selected sewing data.
User can generate jump data at his/her
discretion.
This includes edit functions for the created sewing data, and has the same functions
as the above edit functions of configuration data, except that this is actually applied
to sewing data. To input and delete sewing data, and to move stitches are the same
concept as configuration data. Stitch Point Join is the function to connect the Jump
interval between two point stitches. Add Sewing Speed (Not be currently provided.
This will be provided in the Upgrade Version.) to set up the sewing data speed, and
Sewing Data Divide to select and divide any position of the created sewing data are
provided.
··
Sewing Edit Tool
Add Needle Entry
Point
Delete Needle Entry
Point
Move Needle Entry
Point
Join Needle Entry
Point
Sewing Speed Setting
Divide Sewing Data
Input one stitch of sewing data at the
selected sewing data.
Delete one stitch of sewing data at the
selected sewing data.
Move one stitch of sewing data at the
selected sewing data.
Connect the stitch data between two
selected sewing data.
Set a speed to the selected sewing data.
Divide the selected sewing data.
User's jump input
To Next Page
Loading...
