51
X [mm] : 83.4
Y [mm] : 101.6
ANGLE : 45
MIRROR : OFF
X[mm]: The X dimension (left to right) of the selected design.
Y[mm]: The Y dimension (top to bottom) of the selected design.
ANGLE: The selected orientation of the design by degrees.
MIRROR: Indicates if the reverse function is activated.
X SCALE: Indicates if the design has been scaled up or down in
the X direction.
Y SCALE: Indicates if the design has been scaled up or down in
the Y direction.
X_SCALE : 100
Y_SCALE : 100
To Next Page
Loading...
