4
13. Always power off the
device to install or remove
external devices that do not
support hot-plug.
14. Disconnect the device
from an electrical outlet and
power off before cleaning
the device.
15. DO NOT disassemble the
device. Only a certified
service technician should
perform repair.
16. The device has apertures to
disperse heat. DO NOT block the
device ventilation, the device may
become hot and malfunction as a
result.
17. Risk of explosion if
battery replaced by an
incorrect type. Dispose of
used batteries according to
the instruction.
18. PLUGGABLE
EQUIPMENT: the
socket-outlet shall be
installed near the
equipment and shall be easily accessible.
To Next Page
Loading...
