SunSun COP-10000 - Operation and Storage Guidance; Storage During Winter; Troubleshooting Common Issues

© by WilTec Wildanger Technik GmbH Item 55562 Page 5
http://www.WilTec.de
http://www.aoyue.eu 06 2021-1
http://www.teichtip.de
Storage during winter
1. Take the pump out of the water.
2. Thoroughly clean it.
3. Check the pump and power cord for damage.
4. The device must be stored in a frost-free place and in a container with as much water as possi-
ble.
Troubleshooting
Problem
Possible cause
Proposed solution
Pump does not start.
No mains voltage
Check energy supply.
Pump does not pump (sufficient)
water.
1. Obstruction of pump housing
1. Clean pump housing.
2. Rotor stuck
2. Thoroughly clean pump.
3. Air in the pump
3. Re-start pump.