1. Lateral cover 9. Exhaust hose
2. Air outlet 10. Rounded fixing clip
3. Front cover 11. Square fixing clip
4. Control panel
5. Castor
6. Power cord
7. Air outlet
8. Mobile local air conditioner
Installation
Warning: Let the unit rest for at least 24 hours before you start it. The unit can be easily moved between rooms,
but please note the following:
Installation of the exhaust hose, Fig. 1 and 2
1) Place the unit near a power outlet.
2) Attach the rounded fixing clip at the one side of the exhaust hose and the square clip at the other side.
3) Attach the flat clip to the fitting opening at the back of the unit.
4) Put the other side of the exhaust hose to the outside.
5) Plug the power cord into the outlet (220-240V, 50 Hz).
Functions
This mobile local air conditioner has following functions: COOL, DEHUM, FAN.
The fan has two speeds: LOW and HIGH.
Possible settings: 16-31° C, 24h timer, overheat protection function.
Control panel
To Next Page
Loading...
