This document describes the Suntec Wellness KLIMATRONIC® MOVE 7.000+ / MOVE 9.000+ Mobile Local Air Conditioner.
Function Description
The KLIMATRONIC® MOVE series consists of mobile local air conditioners designed for indoor use. They offer cooling, dehumidifying, and fan-only modes to provide a comfortable indoor climate.
Operating Modes:
- Cooling Mode: The unit automatically starts in cooling mode with a low fan speed upon power-on. Users can adjust the desired room temperature between 16°C and 31°C using the temperature control buttons. The fan speed can also be set to high or low.
- Fan Mode: In this mode, the unit operates solely as a fan, circulating air without cooling. Users can select between high or low fan speeds. Temperature settings and sleep mode are not available in this mode.
- Dehumidifying Mode: This mode is designed to reduce humidity in the room. The fan speed is automatically set to low, and temperature settings and sleep mode are not adjustable.
- Sleep Mode: When activated in cooling mode, the sleep mode gradually increases the set temperature by 1°C after one hour, and by another 1°C after two hours, maintaining this new temperature. This mode is not available in dehumidifying or fan modes. If the water tank becomes full, the unit switches to standby, settings are deleted, and sleep mode is deactivated.
- Timer Function: The timer allows users to set a specific time (1-24 hours) for the unit to turn on or off. This can be set from standby mode for power-on or during operation for power-off.
Compressor Protection:
The compressor requires a start-up phase and will begin operation three minutes after the unit is turned on or restarted, ensuring its longevity.
Automatic Water Evaporation System:
The unit features an automatic water evaporation system. Condensed water is used to cool the condenser, which not only enhances cooling performance but also saves energy. When the water tank is full, a "W.F." indicator will blink on the display, an alarm will sound, and all buttons will be locked until the tank is emptied. To empty the tank, the rubber stopper at the bottom of the unit must be removed to drain the water into a container.
Important Technical Specifications
- Models: MOVE 7.000+ and MOVE 9.000+
- Refrigerant: R410A (HFC32: 50%, HFC125: 50%)
- Global Warming Potential (GWP): 2088
- Refrigerant Quantity:
- MOVE 7.000+: 390g (equivalent to 0.81432t CO2e)
- MOVE 9.000+: 370g (equivalent to 0.77256t CO2e)
- Power Supply: 220-240VAC, 50 Hz, to be connected to a properly grounded electrical outlet.
- Temperature Range (Cooling Mode): 16-31°C
- Installation Clearance: The unit should be placed at least 50 cm away from other objects to ensure optimal performance.
- Upright Positioning: Before initial use, the unit must stand upright for at least 24 hours to prevent irreparable compressor damage.
Usage Features
- Control Panel: The unit is equipped with a user-friendly control panel featuring buttons for Power, Mode (Cooling, Dehumidifying, Fan), Fan Speed (High/Low), Temperature adjustment (+/-), Sleep Mode, and Timer.
- Display: An LED display shows the current settings and indicators for various modes (Sleep, Cooling, Dehumidifying, Fan), fan speeds (High/Low), timer, water tank status, and compressor operation.
- Remote Control: A remote control is included for convenient operation from a distance, offering the same functionalities as the control panel.
- Portability: The unit is designed with castors (laufrollen) for easy movement between rooms.
- Exhaust Hose System: The air conditioner requires an exhaust hose to vent hot air outside. The installation involves attaching adapters to both ends of the hose, connecting one end to the unit's rear opening, and the other to a window kit (Fensterschiebeleiste) for proper ventilation.
- Optional Accessories:
- Air-Block Klima-Sail (EAN 4250058312099): A universal sail for various window and door types, fixed with Velcro and operated via a zipper, allowing windows/doors to be closed at any time.
- Air-Extension-Kit (EAN 4250058312105): A world-first accessory that extends the exhaust air hose by 5 meters using a special propeller, enabling air conditioning in almost any corner of a house regardless of the unit's location.
- Component-Kit 15 RO (EAN 4250058314895): Includes exhaust hose, unit adapter, hose end adapter, window kit, and drainage hose.
- Drainage-Kit 10/11d (EAN 4250058314888): Includes drainage hose and 4 rubber stoppers.
- Remote Control 7K/9K (EAN 4250058314932): Replacement remote control.
Maintenance Features
- Cleaning:
- General Cleaning: The unit should be turned off and unplugged before cleaning. Clean the exterior with a damp cloth and then wipe dry. Avoid using chemical solvents like gasoline or alcohol, and never immerse the unit in water or hold it under running water.
- Air Filter Cleaning: The air filter should be cleaned regularly (every 14 days) to maintain efficiency. It can be removed, washed in warm water (approx. 40°C) with a neutral detergent, rinsed under running water, and dried with a soft cloth. Do not expose the filter to direct sunlight. The unit should not be operated without the air filter.
- Storage:
- Before storing, unplug the unit and empty the water tank.
- Run the unit in fan mode for approximately 2 hours to dry the internal components and prevent mold growth.
- Turn off and unplug the unit.
- Coil the power cord and secure it.
- Disconnect and safely store the exhaust hose.
- Place the unit in a plastic bag and store it in a dry place.
- Remove batteries from the remote control and store them safely.
Safety Precautions:
- Children aged 8 years and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, can use the appliance if supervised and instructed on safe use and understanding of hazards.
- Children under 3 years must be kept away unless continuously supervised.
- Children aged 3 to 8 years may only switch the appliance on/off if it has been placed/installed in its intended operating position, and they have been supervised and instructed on safe use and understand the hazards. They must not plug in, regulate, clean, or perform maintenance.
- Never insert fingers, pens, or other objects into the unit, especially when plugged in or during operation.
- Ensure the air inlet and outlet are never blocked.
- Always pull the plug, not the cable, to disconnect power.
- Do not operate near open flames, direct sunlight, or in environments where oil or water splashes are possible (e.g., bathrooms, showers, swimming pools).
- Always use manufacturer-supplied spare parts and accessories.
- Do not attempt to repair the unit yourself; contact your dealer for repairs.
- If the power cord is damaged, it must be replaced by the manufacturer, service agent, or similarly qualified persons to avoid hazards.
- Do not use multiple sockets or extension cords.
Need help?
General
To Next Page