Suntec Wellness Klimatronic Transform 7000 - Page 14

14
INTRODUCTION / TECHNICAL DATA
Congratulations on purchasing your SUNTEC WELLNESS KLIMATRONIC
®
TRANSFORM unit.
Your air-conditioner has been developed and manufactured in accordance with standards of state of the
art technology.
Please read the operating instructions carefully before connecting your TRANSFORM unit to the power
supply in order to prevent damage from improper use. Pay special attention to the safety instructions. If
you pass this TRANSFORM unit on to a third party, you must also include these operating instructions.
Please keep these operating instructions in a safe place for any questions which may arise in future.
Thank you for showing confidence in our product. We hope you enjoy a pleasant room climate with your
Suntec air-conditioner.
MODEL
TRANSFORM
7000
TRANSFORM
9000
TRANSFORM
10500
TRANSFORM
12000
TRANSFORM
14000
VOLT
220-240 V ~
50 Hz
220-240 V ~
50 Hz
220-240 V ~
50 Hz
220-240 V ~
50 Hz
220-240 V ~
50 Hz
POWER
CONSUMPTION (W)
760 W
990 W
1150 W
1340 W
1530 W
(Wb24 /Db35)
POWER
CONSUMPTION (W)
COOLING
900 W
1100 W
1280 W
1480 W
1700 W
HEATING
(EN60335)
700 W
950 W
1100 W
1300 W
1500 W
COOLING
CAPACITY
2.000 W
2.600 W
3.000 W
3.500 W
4.000 W
HEATING
CAPACITY
2.000 W
2.600 W
3.000 W
3.500 W
4.000 W
(Wb24 / Db35)
DEHUMIDIFICATION
CAPACITY
30L/day
50L/day
50L/day
60L/day
70L/day
(30, RH80%)
NOISE
65 dB
65 dB
65 dB
65 dB
65 dB
AIR CIRCULATION
[m³/h]
360
400
420
450
450
COOLING AGENT
R410a
R410a
R410a
R410a
R410a
REMOTE CONTROL
INCLUSIVE
INCLUSIVE
INCLUSIVE
INCLUSIVE
INCLUSIVE
TIME SWITCH
0-24 STD
0-24 STD
0-24 STD
0-24 STD
0-24 STD
DIMENSIONS (mm)
WXDXH
300x480x630
300x480x630
300x505x778
300x505x778
300x505x778
NET WEIGHT
24 kg
25 kg
28 kg
29.5 kg
30,5 kg
All figures are approx. data. Characteristics pursuant to current Norm EN 14511. Subject to alterations.
EASY TO OPERATE AND EASY TO MOVE AROUND
 The TRANSFORM unit can be moved easily on rollers from room to room.
 The air quantity can be adjusted via up to three ventilation levels.
 The air flow can be very strong and reach up to 5 or 6 metres.
 Installation by a specialist is not required
 Simply plug into a normal household socket with an operating voltage of 220-240V/ 50Hz.
 The extract air hose can be stored in the TRANSFORM unit for transport and when not in use.
 This Suntec TRANSFORM unit operates in accordance with the heat pump principle. On account of
the special, innovative construction of the TRANSFORM unit, its heating function is extremely
efficient compared to conventional heating units.
GB