8
- Each helmet comes with either a soft pouch/bag which should always be
used to protect it against damage, scratches and to maintain the product’s
aesthetic.
Maintenance :
If your helmet is wet or damp after using it, dry it at room temperature
before stowing it away.
Cleaning:
- Do not use any solvents, agressive chemicals or harsh detergents to clean
your helmet. Use only water and mild soap.
- If soiled (sweat), clean the inner paddings of your helmet. They are deta-
chable and can be machine washed at low temperature or use a helmet
cleaning spray.
- Let your helmet dry in a ventilated area at room temperature. Do not use
a hairdryer or any other drying device or heating system.
Storage:
Stow your helmet away in a place where it will be shock/impact protected,
will not be compressed under load, and kept dry in a ventilated area.
LIFESPAN:
It would be well-advised to replace your helmet every ve (5) years. Using it in a
harsh environment could call for more frequent replacements.
In case of damage due to impact, replace your helmet immediately.
To Next Page
Loading...