SUPAIR | STEP | page 9
Brake line length
fisherman's knot
Connecting the glider
Garde
Be certain to adjust and leave a small amount of
line slack to keep steering toggle play, prevent wing
profile deformation and hinder the accelerator func-
tionality.
During acceleration, the glider's trailing edge must
not be deformed.
If you modify the original default setting, have it ins-
pected and approved by a professional before flying..
The default factory maximum brake line length is :
55 cm for an STEP size XS
60 cm for an STEP size S
62 cm for an STEP size M
65 cm for an STEP size ML
67 cm for an STEP size L
Brake line lengths are set at the factory to allow
optimal glider control. However, if they do not suit
you they can be adjusted to your liking.
We will advise using a fisherman's knot and to keep
your length changes to a minimum (approx 5cm
maximum).
Margin
To Next Page
Loading...